UNIT
AP128
DUAL-FREQUENCY SUPERVISED RADIO ALARM UNIT WITH WIRED INPUTS, SERIAL BUS, GSM SETUP
Technical features
- Operating voltage: 230 V AC ± 10% 50Hz
- Current supplied by power supply unit: 2.0 A at 13.6 Vdc
- Consumption: 220 mA (max)
- Removable battery: 7V – 12 Ah
- Superheterodyne receivers: 433.42 / 434.42 MHz
- Alarm relay: 3 contacts 6 A
- Auxiliary relay: 3 contacts 1 A
- Operating temperature: from 0° to +40° C
- Dimensions: 345 x 270 x 75 mm
- Enclosure: painted steel sheet metal
The most advanced unit of its kind, equipped with a dual-frequency receiver of innovative design for maximum security in the communication with satellite devices. It includes 1 wired tamper zone, 4 wired zones (balanced) and 124 radio zones.
It manages up to 32 wireless remote controls and 16 codes through the management keypad. Supervision of the connected devices. Four sectors for the customized management of the system. The AP128 unit is managed entirely by the APT1 remote keypad which is connected via cable. Extremely simple programming of the various operating modes and functions through the guided, user-friendly menus and submenus.
Self-learning of radio sensors, bus interface cards and wireless remote controls. Setting for each wireless zone of the alarm mode: “path”, “and”, “bell”, and it’s possible to set any one of the wired zones as electronic key input. Events storage, even of the temporarily bypassed sensors. Rapid display of the faults.
Detection and memorization of the amplitude of the radio signal strength for each detector. Detection and signalling of jammed radio band for each frequency. Transmission of the main statuses of the unit to surveillance, alarm or control panels. RS485 input. Installation ready for GSM card. Various levels of reset of default data. Total or partial arming from keypad, wireless remote control, or electronic key. The memorized sensors can be freely associated to four sectors and several sectors simultaneously. Management of anti-assault or emergency services signals with radio remote control.
Twelve outputs, of which 8 are fixed and 4 are programmable, provide the signals necessary in the terminal board. The memory records up to in 256 events in a chronological order. Identifying: wireless remote controls, sensors, status, time and total or partial arming mode. For the connection to a PC and future system upgrades, an RS 232 communication port is provided. The maximum reception distance of the radio signals with the provided antenna is about 300 metres in an open field (inside buildings, the maximum distances depend on what the walls and floors are made of and the layout of the building).
Request for further information on AP128
Do you want to receive more information on this product? Fill out the form below and our staff will get back to you as soon as possible.